|The online newspaper for the forest products industry including loggers, sawmills, remanufacturers and secondary wood processors.|
Product Profiles - January 2005
New product and supplier announcements from Iggesund, Morbark, Brewer, L-M Equipment, Parker, Ricke Lake, and Bandit Industries.
By TimberLine Staff
Date Posted: 1/1/2005
S.C. Mill Installs Iggesund POWER Heads for Canter
New South installed Iggesund Tools’ Progressive Outside Wing Edge Repositioning (POWER) heads for its end dog canter at its mill in
Gilman Building Products has begun using Iggesund Tools chipping heads on chip-n-saw canters and reman edgers at its six mills in
The Potlatch mill in
For more information, contact Iggesund Tools at (800) 654-1479 or visit the Web site at www.iggesundtools.com.
Morbark 6600 Wood Hog Available with CAT Tracks
Morbark has developed a new self-propelled horizontal grinder. The Morbark model 6600 wood hog has a state-of-the-art track undercarriage. This powerful, durable machine provides contractors another important equipment option.
The Morbark model 6600 track wood hog is available with engine options ranging from 860 to 1,000 hp, making it powerful enough for the most demanding grinding applications. It can quickly process green waste, logs, brush, stumps and other wood material. The machine can move and grind simultaneously. All functions may be remotely controlled, so it may be run by the operator of a loader or excavator, for example.
It features the Morbark Iqan feed, a variable drive system that automatically adjusts feed rates, pressures and feed wheel positions to optimize production and efficiency. The 42-inch diameter by 67-inch hammermill is equipped with heavy-duty 28-inch rotors; the hammermill components are laser cut for precise tolerances and added durability.
The Caterpillar 330L undercarriage provides a full 18 inches of ground clearance and a wide stance for steep grades.
The Morbark model 6600 track wood hog comes standard with wireless remote control, 11 hp air compressor, electronic rpm sensor, emergency shut-down system and full break-away torque limiter.
For more information, call Morbark at (989) 866-2381 or visit the Web site at www.morbark.com.
Brewer Offers New Trim-Inline Notcher
Brewer Inc.-Golden Eagle has developed a new trim saw-inline notcher.
The new Brewer Inc.-Golden Eagle is particularly suited for remanufacturing random width cants into notched stringers.
Cants are fed through the machine on a chain and dog feed system. The material is end-trimmed and notched in one pass through the machine. Then it is ready to feed directly into a gang resaw to produce cut-to-length, notched stringers.
For more information, contact Brewer Inc.-Golden Eagle at (800) 345-6516 or visit the Web site at www.brewerinc.com.
With the new messaging capabilities, the LaserLight M-Series will slide, scroll or flash any alpha-numeric message. It can relay information about directions or other messages.
The new M-Series is available with an eight or 12 character display. It features a 2.75-inch digit size with standard enunciators for gross, net, lb. and kg.
It is equipped with a non-glare lens to prevent washout in direct sunlight as well as the Rice Lake IntelliBright™ sensing feature to automatically adjust the display intensity; it always provides a sharp, easy to read message under any lighting condition.
For more information, call (715) 234-9171 or visit the Web site at www.rlws.com.
Parker Publishes New Hose Product Bulletin
Parker’s 811HT High-Temperature and 811 Suction and Return Hoses are featured in a new product bulletin published by the hose products division of Parker Hannifin Corp.
The bulletin contains detailed product information such as hose construction, applications and temperature range.
Parker 811HT and 811 Suction and Return Hoses meet or exceed SAE 100R4 requirements and offer a one-half SAE minimum bend radius. The 811HT Suction and Return Hose is suited for high-temperature applications.
For a copy of the bulletin, contact Parker at (440) 205-7799 or visit the Web site at www.parkerhose.com.
L-M Equipment (
L-M Equipment Co. Ltd.’s (
The B42 vertical resaw has been a proven workhorse for cutting cedar roof shingles for over 25 years. L-M Equipment took the proven design and modified it slightly for additional applications that require a heavy duty vertical cutting system.
The L-M Equipment B42 vertical resaw is designed for durable performance and is powered by a 15 hp electric motor. It runs a 1-3/4-inch wide, 1/16-inch kerf blade. It may be equipped with power feed rollers and infeed-outfeed tables.
For more information, call L-M Equipment at (604) 431-8800.
Bandit Offers New Hydraulic-Feed Chipper
Bandit Industries has developed a new model in its line of brush chippers, the model 1290-H. It is a hydraulic-feed, drum-style chipper.
The Bandit model 1290-H has a 37-inch diameter drum, enabling it to cut effectively with the bottom half of the drum. Cutting with a downward arc and on an angle allows the machine to chip with ease, consuming less fuel.
The Bandit model 1290-H has a larger chipper opening and powerful feed system so it can process large-limbed material with limited trimming. It produces uniform, dimensional chips.
The Bandit model 1290-H is available with gas or diesel engine options up to 130 hp. It is also available as a self-propelled unit with a Caterpillar 304 rubber track undercarriage.
Popular options include hydraulic winch, hydraulic or mechanical swivel discharge spout, and Auto Feed Plus feed system governor.
For more information, contact Bandit Industries at (800) 952-0178 or visit the Web site at www.banditchippers.com.
Do you want reprints or a copyright license for this article? Click here
Research and connect with suppliers mentioned in this article using our FREE ZIP Online service.