The online newspaper for the forest products industry including loggers, sawmills, remanufacturers and secondary wood processors.
Pendu Announces New Five Head Shaving Mill

Pendu Announces New Five Head Shaving Mill

By Staff
Date Posted: 10/1/2010

Pendu Manufacturing, Inc. now offers a rugged five head shaving mill to turn waste wood into profits. This Pendu shaving mill features five 6 diameter x 12 wide cutter heads designed to remove of material. This machine will accept 1-1/4 thick material with a minimum length of 16.

The Pendu shaving mill is belt driven by five 40 hp 3600 rpm TEFC motors and includes a plastic chain bed for the seven strands of 80# sharp top chain that moves material through the cutter heads.

The mill is complete with a five hp electric drive and an infeed top pressure roller that is driven from the bottom drive. The top spring loaded hold down bars are chrome plated. This shaving mill can process up to 130 feet per minute, depending on the type of material used, and discharge the finished product through three shaving outlets.

For more information call 800/233-0471.


Do you want reprints or a copyright license for this article?   Click here

Research and connect with suppliers mentioned in this article using our FREE ZIP Online service.

Copyright 2019, IndustrialReporting, Inc.
10244 Timber Ridge Dr., Ashland, VA 23005
Phone: (804) 550-0323 or FAX (804) 550-2181
Terms of Use     Contact our Staff