The online newspaper for the forest products industry including loggers, sawmills, remanufacturers and secondary wood processors.
Rayco Manufacturing, Inc. offers RC1824 Brush Chipper

Rayco Manufacturing, Inc. offers RC1824 Brush Chipper

By Staff
Date Posted: 11/1/2010

            When a chipper feeds better, it makes life easier for the operator. This was the objective held by the RAYCO engineers when they created the RC1824. The RC1824 was given a powerful feed system to pull in brush, limbs, and logs easier, with less trimming. Dual, horizontal feed wheels are off-set to minimize material kick-up. A 24" diameter top feed wheel is powered by a planetary drive motor and easily climbs over large logs without operator assistance.               The chipper throat is 24" wide straight through to the drum, and dead space between feed wheels and chipper drum is minimized. This 18" capacity drum chipper is compact and powerful, featuring a standard 130hp Cummins engine or an optional 160hp Cummins turbo diesel. The engine is rubber isolated for smooth operation. The biggest-in-c1ass chipper drum is 38" diameter by 24" wide to power through challenging material. All this performance comes in a package that’s only 187.5" long with the feed table folded.

            Special features include:

            • Versa-Feed Automatic Feed Control

            • Hydraulic Feed Wheel Lift and Crush

            • Cummins Turbo Diesel Engine

            • Suspension Axle    

            For more information, contact Rayco at 800-392-2686.


Do you want reprints or a copyright license for this article?   Click here

Research and connect with suppliers mentioned in this article using our FREE ZIP Online service.

© Copyright 2019, IndustrialReporting, Inc.
10244 Timber Ridge Dr., Ashland, VA 23005
Phone: (804) 550-0323 or FAX (804) 550-2181
Terms of Use     Contact our Staff