The online newspaper for the forest products industry including loggers, sawmills, remanufacturers and secondary wood processors.
Fecon® Introduces the FCM22

Fecon® Introduces the FCM22

By Staff
Date Posted: 11/1/2010

            Fecon Inc. introduces the FCM22, a 22" capacity chipping module, designed for mobility and flexibility. It can be adapted to the needs of almost any chipping operation. The FCM22 is a good option both in and out of the woods. It can be mounted to new and used log forwarders, tracked vehicles, log trailers, flat bed and log trucks.

            It features load sensing hydraulics and an IQAN control system. The FCM22 is a six-knife drum style chipper that makes a consistent and desirable wood chip. The FCM22 allows production rates of 40 -50 tons per hour and can densely pack chips into open top chip vans, collection wagons, or roll off containers maximizing loads and profits.

            The FCM22 is available with either 365 or 500 horsepower. Mounted on a forwarder or tracked vehicle the FCM22 goes to the woods for biomass collection as well as, right of way chipping, pipeline clearing, and land clearing. Mounted on a trailer, with or without a loader, the FCM22 becomes a productive part of a stationary chipping operation.

            For more information about Fecon’s FCM22 please call Kate Brodbeck at 513-696-4430 or e-mail Kate at


Do you want reprints or a copyright license for this article?   Click here

Research and connect with suppliers mentioned in this article using our FREE ZIP Online service.

© Copyright 2019, IndustrialReporting, Inc.
10244 Timber Ridge Dr., Ashland, VA 23005
Phone: (804) 550-0323 or FAX (804) 550-2181
Terms of Use     Contact our Staff