The online newspaper for the forest products industry including loggers, sawmills, remanufacturers and secondary wood processors.
Safety Alert: Driver Injured in Load Trimming Mishap

A pine pulpwood tree fell from a loader’s grapple and struck a log truck driver on his shoulder and leg as it fell.

By Staff
Date Posted: 8/1/2013


                On a clear, cool, winter day in the South, a log truck driver was waiting for his truck to be loaded with pine pulpwood. His truck was at the landing on a pine plantation clearcut operation.


Personal Characteristics

                The 44-year-old truck driver had been a contract log hauler for approximately 20 years. He had hauled for this logging operation for about 6 months and had been trained in the knowledge of its safety rules.


Unsafe Act

                This logging operation’s safety procedure was for the loader operator to blow the “all clear” horn when he had completed loading the log truck. This was the signal that it was safe for the truck driver to begin trimming and binding the load. However, the truck driver was in a hurry, and he began trimming the load, using a pole saw, on the loader operator’s blind side (the far side of the trailer) before the truck was fully loaded and before the loader operator had blown the horn.



                A pine pulpwood tree fell from the loader’s grapple and landed on the far side of the log truck where the driver was trimming his load. The tree struck the driver on his shoulder and leg as it fell.



                The tree broke the driver’s shoulder, left leg, and two vertebrae. The driver also received several lacerations. He lost 4 to 6 months of work time while he underwent several surgeries and physical therapy. His total hospital stay was three weeks.



                During loading, the driver should stay in a designated “waiting area” that is located well away from the loading operation but in clear view of the loader operator. If the driver is not at the designated location, loading should stop.

    Truck drivers must learn and obey all logging operations’ safety policies, which in this case required that the driver does not begin trimming the load until the “all clear” horn has been sounded.

    Many operations find that it is safer to have the driver pull the loaded truck out of the loading zone before trimming and/or binding the load.

    On the logging job, all truck drivers (and on-the-ground workers) should wear personal protective equipment including hardhat, safety glasses, and high visibility vest when out of the cab.


                Source: Forest Resources Association


Do you want reprints or a copyright license for this article?   Click here

Research and connect with suppliers mentioned in this article using our FREE ZIP Online service.

© Copyright 2018, IndustrialReporting, Inc.
10244 Timber Ridge Dr., Ashland, VA 23005
Phone: (804) 550-0323 or FAX (804) 550-2181
Terms of Use     Contact our Staff