The online newspaper for the forest products industry including loggers, sawmills, remanufacturers and secondary wood processors.
 
Horizontal Shredder from Vecoplan for Lineal Scrap

Product Profile

By Staff
Date Posted: 10/1/2013


                Vecoplan’s VTH 45/12/2 VU is one of the company’s comprehensive line of continuous feed, horizontal shredders for lineal scrap. The VTH 45/12/2 VU features an 18" wide x 5" high in feed opening, a continuous feed 16’ vibratory feed conveyor and is designed specifically for shredding strips, moldings, siding, profiles, composite lumber, pipe, or any long waste.

                The VTH 45/12/2 VU’s high output, “Torsion Point” cutting rotor is 16" in diameter, and powered by a 60 HP drive motor. 24 – 40x40mm cutting inserts are recessed into, and bolted onto the rotor. Each insert features four points that can be quickly and easily rotated to extend cutting life. Developed and patented by Vecoplan, the “U” cutting rotor is engineered for durability.

                Lineal scrap is pulled into the rotor by both top and bottom feed rollers. Each feed roller is driven by separate 2 HP motors, the dual feed rollers deliver aggressive positive feeding and at the same time provide added safety by minimizing material bouncing or flopping common to long scrap. Material is then cut between the inserts on the rotor, and a replaceable serrated bed counter knife.

                For more information contact Vecoplan at 336/861-6070, email: info@vecoplanllc.com or visit the website at www.Vecoplan.com




 






Do you want reprints or a copyright license for this article?   Click here


Research and connect with suppliers mentioned in this article using our FREE ZIP Online service.


Copyright 2017, IndustrialReporting, Inc.
10244 Timber Ridge Dr., Ashland, VA 23005
Phone: (804) 550-0323 or FAX (804) 550-2181
Terms of Use     Contact our Staff