The online newspaper for the forest products industry including loggers, sawmills, remanufacturers and secondary wood processors.
 
Safety Alert: Skidder Operator Injures Ankle From Improper Dismount

A young, athletic logger jumped out of a skidder while facing forward, rather than turning around backwards. One of his feet landed hard on a two-inch-diameter limb that was lying on the ground, causing his ankle to twist.

By Staff
Date Posted: 2/2/2016


BACKGROUND:

                On a dry, autumn day in the Appalachians, a logger was exiting the cab of his grapple skidder.

 

PERSONAL CHARACTERISTICS:

                The logger worked in his family logging business and was in his early twenties. He had approximately five years of previous logging experience and was considered fully trained for the job. He was wearing a hard hat.

 

UNSAFE ACT:

                This young, athletic individual jumped out of the skidder while facing forward, rather than turning around backwards and using the "three points of contact" rule and slowly stepping down and out of the skidder.

 

ACCIDENT:

                One of his feet landed hard on a two-inch-diameter limb that was lying on the ground, causing his ankle to twist.

 

INJURY:

                The logger suffered a sprained ankle. His injury probably would have been much greater—perhaps a broken ankle—if he had not been a thin, light, athletic individual.

 

RECOMMENDATIONS

                Park the machine on a clear section of ground with no tripping hazards or other obstacles to a safe exit. Always use three points of contact when mounting or dismounting a machine. That means keeping one hand and two feet, or two hands and one foot, in contact with the machine steps or handholds at all times. Face the machine when mounting or dismounting.

                Additional safety considerations in dismounting:

                • Make sure the bottom step of the machine is serviceable and not missing.

                • Ensure that the soles of the shoes and machine steps are clean of mud, oil, and any substance that may cause you to slip.

                • Set the machine's parking brake and lower blades to the ground before dismounting.

                • Never mount or dismount from a moving machine.

                Source: Forest Resources Association




 






Do you want reprints or a copyright license for this article?   Click here


Research and connect with suppliers mentioned in this article using our FREE ZIP Online service.


Copyright 2017, IndustrialReporting, Inc.
10244 Timber Ridge Dr., Ashland, VA 23005
Phone: (804) 550-0323 or FAX (804) 550-2181
Terms of Use     Contact our Staff